Home > Safety & Environmental Help and Guidance > Light Measurements > Photometry and Light Measurement
Photometry (measuring light levels) is the science of measurement of visible light in terms of its perceived brightness to human vision.
Light can be measured in several ways. Two of the most frequently used methods used in industry include Lux and foot-candles. Lux (lux) is a unit of illumination of one square meter which is one meter away from a uniform light source. One lux is equal to one lumen per square meter.
An employer has a duty to ensure the health and safety of their employees, which is covered under the health and safety at work act 1974. This act describes a duty to provide lighting that enables work to be carried out safely without putting employees health or eyes at risk.
Regulation 8 of workplace regulations 1992 says that:
The amount of light needed depends on what type of work is being carried out. (see table below)
Interior levels are much lower than outdoor natural light.
Some typical light levels are:
Light Measurement Meters
The two main instruments for measuring light are photometers and spectrometers,
A photometer is any instrument that can be used to measure illuminance or irradiance. These meters are often applied in industry as ‘photometer’ is a general term for “detecting instruments”. Most photometers work by using either photo resistors or photodiodes. These work by showing a change in electrical properties when exposed to light which is easily detected using a suitable electronic current.
A spectrometer is an optical instrument which is used to measure the properties of light over a specific proportion of its electromagnetic spectrum. Spectrometers use light intensity as the variable measurement and wavelength as the independent variable measurement. Spectrometer is often a term that is applied to instruments that work over a wide range of wavelength from X-rays, gamma rays & far infrared.
CLICK HERE FOR Information, technical data, images and pricing of all Castle Group Ltd. products
CLICK HERE FOR Hire the best equipment at a fraction of the purchase price
CLICK HERE FOR Calibration and repair services from Air Samplers to Vibration Meters
CLICK HERE FOR World class safety and environmental courses. On your site or our 4* training facility
CLICK HERE FOR Employ our expertise for both simple and more demanding issues.