Complete Dust and Vapour Air Sampling Kit - Sidekick and Calibrators

Sidekick Deluxe

The Sidekick is one of the most popular sampling pump meters around. It is a precision sampling multi-function pump for high and low sampling. This product is highly reliable and simple to use because it has been built to withstand the toughest of environments. This Kit comes with the Deluxe Sidekick, with ATEX Approval and Timers meaning it's suitable for use in Hazardous Environments. A snap-shut case controls the Sidekick so the unit cannot be accidentally shut off whilst it is in use.

Features

• Flow Range 5 – 3000 ml/min
• Low Flow Capabilities
• Multi Tube Sampling in Low Flow
• Built in Particle Trap
• Built in Dampener
• High Accuracy Clock
• Light Weight
• Simple to Use
• Manually Adjustable
• Robust Case
• Battery or Mains Operated

The Sidekick has a flow range of 5-3000 millilitres per minute. Additionally a CPC and a low flow adapter provide the option to sample gases and vapours for up to 500 millilitres per minute. Supporting multi-tube sampling at the same time from one pump all at different flow rates is an advantage of this system. The Sidekick is a popular choice because it has the ability to sample for different hazards without needing more than one pump. As the controls are under a "snap down" cover it prevents accidental operation, therefore it has been proven to be a winner with safety managers and hygienists. The Sidekick is available in a number of different variations depending on your requirements. Kits include Carry Case, Mini Tool Kit, Battery Charger, 1m Tygon Tubing, Instruction Manuals and Step-By-Step Guides. Dust/Particulate Kits also include Plastic IOM Multi-dust Sampler and 4 Cassettes, Plastic Cyclone and 4 Cassettes, 5 Filter Transport Cassettes, 100 Glass Fibre Filters. Gas/Vapour Kits also include Single Adjustable Flow Holder, Type A Protective Tube Cover. Please Note. A Filter Medium will also be required. Due to the large number of filter mediums available we will contact you to find out your specific requirements. Paper and Sorbent filter mediums are all priced separately.

Bubble Film Flowmeter

This product is the Bubble Film Flowmeter and it checks the operation of air sampling equipment and it allows for simple and easy operation. You can calculate the flow rates if you attach a sampling pump to the top of a volumetric glass tube which contains liquid soap. When the pump is drawing in air through the tube the soap bubble will move from one marked point to the next one. You can then calculate the flow rate by the time of travel which is measured by a stopwatch. This kit is supplied with all the equipment which is required, except the stopwatch, for calibrating low flow personal sample pumps.

Chek-Mate

The SKC chek-mate Flowmeter is our easy to use differential pressure flowmeter for calibrating air flow sample pumps at flow ranges between 0.75 and 5.0 L/min. The chek-mate meets the accuracy requirements of MDHS 14/4.

Click Here to be Directed to a Glossary of Terms for Air Sampling

Standards	RFI and EMC shielded to EN 55022 & EN 50082-1
Operating Range	5-3000 ml/min (5-500 requires adaptor)
Weight	510g
Dimensions	76 x 126 x 44 mm
Flow Control	+5% Set Point Constant Flow
Run Time	8 hours minimum at 2500-3000 ml/min and 15" water
Operating Temperature	-20°C to +40°C
Storage Temperature	-20°C to +40°C
Operating Humidity	0 to 95% relative
Compensation Range	1000ml/min 5-25" water back pressure 2000ml/min 0-25" water back pressure 2500ml/min 0-20" water back pressure 3000ml/min 0-15" water back pressure
Battery Pack	Plug in Rechargeable NiCad, 2.0 Ah, 4.8 Volts DC a

224-52MTXKC - Sidekick Deluxe Single Pump Dust and Vapour Kit:

Sidekick Deluxe pump with timer and NiMH battery pack ATEX Approved, and Single charger, screwdriver set, Sidekick Step by Step Guide, single adjustable tube holder, constant pressure controller, protective tube covers, tube breaker, 1 m length Tygon tubing, Plastic Cyclone sampler, 5 Cyclone cassettes, IOM Multidust sampler, 5 IOM Multidust cassettes, calidaptor and operating manuals in a carry case

303-SKC Bubble Film Flowmeter Kit:

• 100-ml buret flowmeter


• Operating instructions


• Flow charts for flow rate calculations


• Carry case

375-07550 - SKC Chek-Mate Flowmeter

Sidekick Models Include:

• Sidekick Standard Sample Pump
• Sidekick ATEX Approved Intermediate Pump
• Sidekick ATEX Approved Deluxe Pump with Elapsed Timer

Each Sidekick Model comes with the following variations:

• Sidekick Pump Only
• Sidekick Pump Basic Kit
• Sidekick Pump Kit for Dust/Particulates
• Sidekick Pump Kit for Gas/Vapour
• Sidekick Pump Kit Combined Dust/Particulates and Gas/Vapour

Each Kit is available with a Single Pump or Five Pumps.