Calibrators

Calibrators for Noise Meters, Vibration Meters and Air Samplers

In order to provide a constant, accurate, response from a meter or instrument, it is important to check before and after each use. Calibrators provide quick and simple ways to ensure your meter is operating properly and functioning as expected.

  • For Noise, pre-measurement calibrations are required in the standards.
  • For Vibration, it's strongly recommended.
  • For Air Sampling, pre-measurement calibrations are mandatory.

    You can now trade in your old instruments, of any manufacture, for a fantastic trade in discount

  • 5 Item(s)

    per page

    Grid  List 

    • Price from
      Excl Tax: £566.50
      Incl Tax: £679.80

      This is the Class 1 Acoustic Calibrator, which is very small and housed in a rugged case which makes it easy to transport and keeps damage to a minimum. It is important that the kits are re-calibrated before and after the results are taken because the results may be distorted if the meters are not reading correctly and therefore you may not comply to the work regulation standards. The class two has a lower accuracy than the class one calibrator, so it depends what type of accuracy is needed for the job. The technical specification shows the accuracy levels.

      Brand Casella
      Application Field Calibration
      Class Class 1
    • Price from
      Excl Tax: £277.20
      Incl Tax: £332.64

      This is the Class 2 Acoustic Calibrator, which is very small and housed in a rugged case which makes it easy to transport and keeps damage to a minimum. It is important that the kits are re calibrated before and after the results are taken because the results may be distorted if the meters are not reading correctly and therefore you may not comply to the work regulation standards. The class two has a lower accuracy than the class one calibrator, so it depends what type of accuracy is needed for the job. The technical specification shows the accuracy levels.

      Brand Casella
      Application Field Calibration
      Class Class 1, Class 2
    • Price from
      Excl Tax: £257.00
      Incl Tax: £308.40

      The Castle GA601 produces a calibration tone of 1000Hz at a level of 94dB re 20µPa at the microphone. The GA601 Acoustic Calibrator comes with a 12 Month Manufacturers Calibration with Certificate, however if you require UKAS Calibration this can be added below.

      Brand Castle Group
      Application Field Calibration
      Class Class 2
    • Price from
      Excl Tax: £385.00
      Incl Tax: £462.00

      GA607 Acoustic CalibratorThe GA607 meets the demanding standards of a Class 1 calibrator. It features two calibration levels, 94dB and 104dB re 20µPa both at 1kHz and is supplied with required barometer. The GA607 Acoustic Calibrator comes with a 12 Month Manufacturers Calibration with Certificate, however if you require UKAS Calibration this can be added below.

      Brand Castle Group
      Application Field Calibration
      Class Class 1
    • Price from
      Excl Tax: £2,023.00
      Incl Tax: £2,427.60

      The SV110 is the ideal portable handheld calibrator designed for verification of machine sensors as well as on-site checks of human vibration accelerometers in accordance to ISO 8041.

      Brand Svantek
      Measurement Hand Arm Vibration

    5 Item(s)

    per page

    Grid  List