This Castle Sonus Data Logging Sound Level Meter provides you with a cost effective solution to making noise measurements for Noise at Work and Environmental Noise Assessments.
It's fully compliant to IEC61672-1-2013 for Sound Level Meters, and also meets the requirements to be used in BS 4142:2014 assessments, which also makies this rugged little meter a useful tool for noise consultants who offer a variety of different noise monitoring services.
This Castle Sonus 116L comes with dBDataLite, the free version of Castle Noise Analysis Software.
|Application||Environmental Noise, Noise at Work|
|Weightings||A, C, Z|
|Available Outside the UK?||Yes|
The Castle Sonus range of pocket sized sound level meters bring simplicity and power to the world of Noise at Work and Environmental sound monitoring.
From basic nonlogging sound level meters to combined sound and dose meters with time and date stamped data logging capability.
The flagship model of the Pocket Sonus Meter range is the class one Sonus GA116L which is a full data logging, integrating sound and noise exposure meter (dosemeter) which has been designed or both Noise at Work assessments and Environmental Sound monitoring. The Sonus L is the upgraded model of the Sonus i, coming with full data logging and download capabilities.
The unique benefit of owning a Castle GA116L is that it can also be used as a Personal Sound Exposure Meter, a dosemeter, when it is accompanied with a separate pre-amplifier.
|RANGE||DISPLAY RANGE||LINEAR RANGE||PEAK RANGE|
|30-100||29 – 101dB||30 – 100dB||40 – 103dB|
|50-120||59 – 121dB||50 – 120dB||60 – 123dB|
|70-140||69 – 141dB||70 – 140dB||80 – 143dB|
|Linear Operating Range||70dB|
|Detector Characteristics||RMS and Peak|
|Frequency Weighting||‘A’, ‘C’ & ‘Z’ Weighted in Accordance with IEC 61672-1-2002 Combinations of ‘A’, ‘A’&’C’ simultaneous or ‘A’&’Z’ simultaneous available for Leq, Lmax and Pmax|
|Time Weighting||‘Slow’, ’Fast’ and ‘Impulse’ in Accordance with IEC 61672-1-2002|
|Exchange Rate||3dB, 4dB or 5dB|
|Criterion Level||75dB, 80dB, 85dB or 90dB|
|Threshold Level||-5dB, -10dB or OFF|
|Peak||3dB above top of selected range|
|Display||Custom alphanumeric LCD, digit size 7mm x 5mm|
|Memory||2100 Data Intervals Maximum|
|Microphone/ Preamplifier||ACO 7146A pre-polarised ½” condenser microphone, 25mV / Pa|
|Calibration||91.0 to 120.0dB @ 1KHz|
|Batteries||1 x PP3 (9V) Approximately 12 hours continuous use|
|Operating Temperature||Operating Range: -10 to + 50ºC|
|Humidity||Effect: < 0.5dB from 25% to 90% RH|
|Vibration||No effect on instrument|