Svan 977 Sound and Vibration Analyser

06SVAN977

Be the first to review this product

Quick Overview

The Svan 977 is a high end piece of equipment in the sound and vibration industry, it is a type 1 instrument that meets the environmental monitoring of occupational heath and safety monitoring standards. It has extremely new and high tech hardware which allows the measurement of ultra sound frequencies in the 40kHz band.


The SVAN 977 can provide broadband results and all the standard weighting filters and also offers a time history logging capability providing broadband results and spectra with adjustable double (long and short) logging steps.

Price:

Talk to an expert about this product




Svan 977 Sound and Vibration Analyser
Svan 977 Sound and Vibration Analyser SV977 Sound and Vibration Analyser Svantek SV977 Sound and Vibration Analyser

Buy Online

* Required Fields

£2,542.00

£2,542.00
Brand Svantek
Application Environmental Noise
Features 1/1 Octave Bands, 1/3 Octave Bands, Data Logging
Weightings A, C, Z
Measurement Parameters Leq, (Percentiles) Ln's
Available Outside the UK? No

Svan 977 Sound and Vibration Analyser

The Svan 977 is a high end piece of equipment in the sound and vibration industry, it is a type 1 instrument that meets the environmental monitoring of occupational heath and safety monitoring standards. It has extremely new and high tech hardware which allows the measurement of ultra sound frequencies in the 40kHz band!

The SVAN 977 can provide broadband results and all the standard weighting filters and also offers a time history logging capability providing broadband results and spectra with adjustable double (long and short) logging steps.

Its ability to record audio means it can be performed simultaneously with time history logging as either a separate wave file or as audio events inside time history files. Measurement results are recorded in three acoustic or vibration profiles enabling measurements to be performed with 3 different filters (e.g. A, C, Z) and 3 different detector time constants (e.g. Fast, Slow, Impulse).

Measurement data is stored on a µSD card and can be easily downloaded to a PC using SvanPC++ software over either USB or RS 232 interfaces.

The powerful DSP (digital signal processor) used in the SVAN 977 instrument can simultaneously operate in meter mode and perform real-time 1/1 or 1/3 octave analysis including statistical calculations. Additional functions like real-time FFT analysis and Rotation Speed Measurement are also available.

Features:

  • Class 1 IEC 61672:2013 sound level measurements
  • Ultra sound measurements in 40 kHz band
  • General vibration measurements (acceleration, velocity and displacement)
  • Three parallel independent profiles
  • 1/1 octave real-time analysis
  • 1/3 octave real-time analysis (optional)
  • FFT analysis (optional)
  • Time-domain signal recording & audio events recording (optional)
  • Reverberation time measurements (optional)
  • Advanced Data Logger including spectral analysis
  • Statistical Level incl. Octavebands
  • Timer Function
  • Alarm Function
  • MicroSD card providing almost unlimited logging capacity
  • Bluetooth® interface (optional)
  • USB Host Modem-Interface (optional)
  • All weather microphone protection kit designed for community and airport noise monitoring (optional)
  • OLED color display with super brightness and contrast
  • Hand held, light weight and robust case
  • Easy to use

Main applications:

  • Sound measurements
  • Environmental noise
  • Occupational noise
  • Building acoustic
  • Ultrasound/infrasound
  • High level/low level noise
  • Machine vibration



Only Available In The UK

Technical Specification

SOUND LEVEL METER / ANALYSER
Standards Type 1: IEC 61672-1:2002
Meter Mode SPL, Leq, SEL, Lden, Ltm3, Ltm5, Statistics - Ln (L1-L99), LMax, LMin, LPeak Simultaneous measurement in three profiles with independent set of filters and detectors
Analyser 1/1 or optional 1/3 octave1 real-time analysis meeting Type 1 requirements of IEC 61260
FFT 1 real-time analysis 1600 lines, up to 20.0 kHz band (option)
Reverberation time analysis in 1/3 octave bands (RT 60 option)
Weighting Filters A, B, C , Z
RMS Detectors Digital True RMS detector with Peak detection, resolution 0.1 dB, Time Constants: Slow, Fast, Impulse
Microphone ACO 7052E, nominal sensitivity 35 mV/Pa, prepolarised 1/2” condenser microphone
Total Dynamic Measurement Range 15 dBA RMS - 140 dBA Peak (typical from noise floor to the maximum level)
Linear Operating Range 25 dBA RMS - 140 dBA Peak (in accordance to IEC 61672)
Internal Noise Level less than 15 dBA RMS
Frequency Range 10 Hz ÷ 40 kHz (transducer dependent)
VIBRATION LEVEL METER / ANALYSER
Standards ISO 10816-1
Meter Mode RMS, MAX, Peak, Peak-Peak Simultaneous measurement in three profiles with independent set of filters and detectors
Analyser 1/1 or optional 1/3 octave1 real-time analysis
FFT1 real-time analysis 1600 lines, up to 20.0 kHz band (option)
RPM1 rotation speed measurement parallel to the vibration measurement (option)
Filters HP1, HP3, HP10, Vel1, Vel3, Vel10, VelMF, Dil1, Dil3, Dil10
RMS & RMQ Detectors Digital True RMS detector with Peak detection, resolution 0.1 dB Time constants: from 100 ms to 10 s
Accelerometer (option) Any IEPE accelerometer
Measurement Range Accelerometer dependent
Frequency Range 1 Hz ÷ 40 kHz (transducer dependent)
BASIC DATA
Input IEPE type (TNC connector)
Dynamic Range >110 dB
Frequency Range 10 Hz ÷ 22.4 kHz (sampling rate 48 kHz) or 44.0 kHz (sampling 96 kHz);
Datalogger1 Time-history logging with adjustable double (long and short) logging steps Time-domain signal recording and audio events recording function both to micro SD card or USB Memory Disk
Display Super contrast (10000:1) OLED 2.4” colour display (320 x 240 pixels)
Memory 32 MB non-volatile flash type, micro SD card 4 GB (included) or external USB Memory Stick (not included)
Interfaces USB 2.0 Client, Bluetooth (optional), RS 232 (with SV 55 option)
Extended I/O - AC output (1 V Peak) or Digital Input/Output (Trigger – Pulse)
Power Supply Four NiMH rechargeable batteries (option) operation time > 8 h ÷ 12 h (4.8V / 2.6 Ah)2 SA 17A external battery pack operation time > 24 h (option)2 External power supply 6 V/500 mA DC ÷ 15 V/ 250 mA DC USB interface 500 mA HUB
Environmental Conditions Temperature from -10oC to 50oC
Humidity up to 90 % RH, non-condensed
Dimensions 305 x 79 x 39 mm (with microphone and preamplifier)
Weight Approx. 0.6 kg with batteries

Downloads and Datasheets

Software

About SvanPC++

This piece of advanced software supports Svantek measuring instruments. Each Svantek device is is easy to use and a complete measuring systems because of the functionalities and extended capabilities in this advanced application. The software has been divided for several specialised modules by distinguishing application fields in order to give users the perfectly customised, powerful and sophisticated tool. The functions provided by the main module include measurement data downloading from instruments to PC, measurement setups creating, basic Leq/RMS recalculation, measurement results in text, tabular and graphical format, export data to spread sheets or text editor applications.

Features include:

  • Being able to easily download data of measurements to a PC
  • Total Leq/ RMS recalculation
  • Quick reporting tool
  • A variety of presentation results including text, table and graphical format 
  • Advanced customisation of each view
  • Creation of measurement setups  
  • Merging of measurement files.

Write Your Own Review

Only registered users can write reviews. Please, log in or register