| Brand | SKC |
|---|---|
| Flowrate (ml/min) | 5 |
| Maximum Flowrate (ml/min) | 4,000 |
| Application | Dust Sampling, Vapour Sampling |
| Features | Airflow, ATEX |
| Available Outside the UK? | Yes |
Sidekick Dust & Vapour ATEX pump which comes complete with rotameter, tubing, IOM and cyclone heads. The only thing we do not supply is the filters/papers/tubes/carry cases/cassettes and these need to be purchased from a laboratory. A list of laboratories who will be pleased to supply you with the necessary filters, filter cases etc that you require for carrying out the sampling can be supplied upon request. Supplied with IOM & Cyclone heads, Tubing and Rotameter Only.
The Sidekick Dust and Vapour Deluxe Sampling Pump is a reliable and simple monitor making it a good entry level pump with high build quality. The controls are protected by a clear snap down cover, so the unit cannot be accidentally switched off when in use. A wide flow range means the Sidekick is suitable for dust and gas sampling projects.
The lower flows are achieved with the constant pressure controller and low flow adapter. It comes with a timer and ATEX approval. There is a snap shut case which covers the Sidekick’s controls so the unit cannot be accidently shut off whilst it is in use. They have a flow range of 5-3000 millilitres per minute. A CPC and a low flow adapter provide the option to sample gases and vapours for up to 500 millilitres per minute. It supports the multi-tube sampling at the same time from one pump all at different flow rates is an advantage of this system. The Sidekick is a popular choice as it has the ability to sample for different hazards without needing more than one pump.
| Operating Range | 5-3000 ml/min (5-500 requires adapter) |
| Weight | 510g |
| Dimensions | 76 x 126 x 44mm |
| Flow Control | +5% Set Point Constant Flow |
| Run Time | 8 hours minimum at 2500-3000 ml/min and 15″ water |
| Operating Temperature | -20°C to +40°C |
| Storage Temperature | -20°C to +40°C |
| Operating Humidity | 0 to 95% relative |
| Compensation Range | 1000 ml/min 5-25″ water back pressure 2000 ml/min 0-25″ water back pressure 2500 ml/min 0-20″ water back pressure 3000 ml/min 0-15″ water back pressure |
| Battery Pack | Plug in rechargeable NiCad. 2.0 Ah, 4.8 Volts DC |
| Timer Accuracy | + 0.1% |
