|| Chauvin Arnoux
|Available Outside the UK?
Rent the Chuavin Arnoux PEL103 Power and Energy Logger 0-1000 V AC & DC,
Optimize your energy efficiency with PEL100 Power and Energy Loggers. Offering much more than simple energy metering, our PEL100 electrical measuring instruments record electrical consumption while measuring and analysing the power supplied.
PEL100 Power and Energy Loggers enable you to monitor your installations in order to identify potential areas for improvement, optimize your energy performance and achieve significant savings.
Ergonomic, magnetized and suitable for all types of cabinets, PEL103 loggers provide all the power and energy measurements simultaneously. Developed with a compact design to ensure they can be installed with their current sensors on any type of switchboard without preventing the cabiner door from closing. Installation is easy with the PEL's magnetised case, and it can also be installed without cutting off the mains electricity supply.
About the PEL Energy Logger
The PEL 100 Energy Logger record all the electricity consumption of factories, workshops, buildings, agency etc. This makes it simple for you to find out the precide details of your energy consumptions so that you can optimize and reduce your energy bills. Use the PEL to simultaneoously monitor real-time consumption and comparative historical consumption analysis.
All recording made with the PEL Energy Logger are time and date stamped. In this way, the gains achieved can be measured very simply by comparing the recordings before and after modifications to an installation. The analysis of the recordings made with the PEL100 before the modifications provides the period of reference. The various operations for maintenance, improvement of the electrical network and equipment, etc., can then be carried out.
A correctly-positioned PEL100 will quickly help to spotlight the points where work is required, without wasting any time. A follow-up period will then enable you to determine whether the solutions implemented are sufficient and, in particular, to measure precisely the savings achieved. The PEL100 will then provide the data for comparison with the recordings from the period of reference. The DataView®analysis software can then be used to produce customized reports.
- Single-phase, split-phase and three-phase installations with or without a neutral, as well as other complex configurations.
- Implementation without cutting off the mains power supply
- BlueTooth, Ethernet and USB communication
- Automatic recognition of the sensors connected
- Recording on SD and SD-HC cards
- Real-time communication with a PC and analysis using PEL Transfer software
- Voltage up to 1,000 V
- Current up to 10,000 A
- Voltage ratio / current ratio up to 650,000 V / up to 25,000 A
- Power from 10 W/var/VA to 10 GW/Gvar/GVA
- Energy up to 4EWh / 4 EVAh / 4 Evarh
- Phase: cos φ, tan Φ, PF
- Harmonics up to 50th order
- 2 GB SD memory card (SD-HC card up to 32 GB)
PEL Power & Energy Logger Introduction Video